Loading ...
Loading ...
Loading ...
10
OPERATING PROCEDURES & MAINTENANCE
1. Remove the exterior and interior packaging. Check if ice basket and ice scoop are inside. If
any parts are missing, please contact hOme
™
Customer Service at 1-800-898-3002.
2. Remove the tape holding the ice shovel, ice basket & ice scoop to the appliance. Clean the
tank & ice basket, using soapy water. Let appliance dry completely.
3. Put the appliance on a at surface without direct sunlight and/or other sources of heat
(i.e.: stove, furnace, radiator). Make sure that there is at least a 4 inch (101 mm) gap
between the back & LH/RH sides of the wall.
4. Allow one hour for the refrigerant uid to settle before plugging the appliance in.
5. The appliance must be positioned so that the plug is accessible.
6. Keep in upright position for 24 hours before initial power up.
UNPACKING YOUR ICE MAKER
1. This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug which couples with standard three prong
wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into a secure, properly installed, grounded wall outlet. Do not under
any circumstances, cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certied
electrician.
3. This appliance requires a standard 110-120 volt, 60Hz electrical outlet with three-prong
ground.
CONNECTING YOUR ICE MAKER
WARNING: Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged, please contact hOme
™
Customer Service at 1-800-898-3002.
Loading ...
Loading ...
Loading ...