Loading ...
Loading ...
Loading ...
74
GB
STR-DA7ES
Listening to the sound in another room (continued)
To change button assignments for
the 2nd room mode
When the remote is set to the 2nd room mode,
you can set the remote to turn the receiver
on/off or adjust the volume.
You can assign the following buttons:
?/1, MUTING, MASTER VOL +, MASTER
VOL –
Example: To set the command mode of above 4
buttons to “AV SYSTEM 1” while in the 2nd
room mode.
1 Press USE MODE more than 2 seconds.
The indicator remains lit.
2 Press 2ND ROOM.
3 Press AV SYSTEM 1.
4 Press SOURCE.
The indicator slowly lights up twice, then
goes off.
For the above 4 buttons, the signals for AV
SYSTEM 1 are output even in the 2nd room
mode. Besides, you can operate the receiver
whose command mode is “AV SYSTEM
1”.
To change assignments for the 3rd
room
Press 3RD ROOM in step 2.
Note
To reset the assignments of ?/1, MUTING,
MASTER VOL +, MASTER VOL –, press 2ND
ROOM (during 2nd room mode) or 3RD ROOM
(during 3rd room mode) in step 3. Or, clear all remote
button assignments (page 73), then perform the
procedures on page 68 or 69.
To set the remote RM-US105A not to
adjust the volume
Press the following buttons in step 3:
• 3RD ROOM (during 2nd room mode)
• 2ND ROOM (during 3rd room mode)
This locks the use of ?/1, MASTER VOL +,
MASTER VOL – on the remote RM-US105A
from controlling any receiver in the main/2nd/
3rd room.
Receiver
(STR-XXXX)
Monitor
Speaker
Speaker
Audio/Video components
2nd (or 3rd) room
AV SYSTEM 1
Main room
AV SYSTEM 2
2ND or
3RD
ROOM
OUT
Loading ...
Loading ...
Loading ...