Loading ...
Loading ...
Loading ...
68
GB
Listening to the sound in another room (continued)
Amplifier
Monitor
Speaker
Speaker
IR repeater
(not supplied)
IR repeater
(not supplied)
Audio/Video components
2nd roomMain room
x 2nd room operation
2ND
ROOM
OUT
STR-DA7ES
RM-US105A
+
–
Mm
+–
+
–
>.
xX
Nn
Using an optional IR repeater as shown above
The following operations are possible with the RM-US105A remote:
• Switching the output source for the 2ND ROOM OUT jacks.
• Adjusting the volume from the 2ND ROOM OUT jacks.
• Switching the output to the 2ND ROOM OUT jacks on or off.
Set the command mode of the RM-US105A remote to the 2ND ROOM mode.
1 Press USE MODE momentarily.
The current command mode button slowly lights up 5 times.
2 While the button blinks, press AV SYSTEM 1 or AV SYSTEM 2 according to the
command mode of the reciever in the main room.
3 Press USE MODE momentarily again.
4 Press 2ND ROOM while the button blinks.
The command mode has been set to the 2nd room mode.
Tip
Once steps 1 and 2 are done, the setting is stored in the remote’s memory. However, when you change the
command mode of the receiver, perform steps 1 to 4 again.
Loading ...
Loading ...
Loading ...