Loading ...
Loading ...
Loading ...
USING YOUR WINE CABINET
Before Switching On
o Make sure that it has been installed by a suitably qualied person, as per
the information contained in the installation instructions.
o After delivery, wait for eight hours before connecting the appliance to
your mains supply. This will allow any refrigerant gasses that may have
been disturbed during the transportation process to settle.
o The outside of the appliance and the removable accessories contained
within it, should be cleaned with a solution of liquid detergent and water.
o The interior of the appliance should be cleaned with a
solution of sodium bicarbonate dissolved in lukewarm
water. The interior and accessories should be thoroughly
dried, after the cleaning process has been completed.
o There can be an odour when you rst switch on the
appliance. It will lessen as the appliance starts to cool.
During First Use
IMPORTANT: When you use the Wine Cabinet for the rst time or restart the
appliance after it has been turned off for a long time, there could be a
few degrees variance between the temperature you select and the one
indicated on the LED display. This is normal and it is due to the length of
activation time. Once the Wine Cabinet has been running for a few hours
everything will be back to normal.
o When you first switch on the appliance, the compressor will run
continuously until the Wine Cabinet reaches a cool enough temperature.
o During this period of time, you should try not to open the door frequently
or place bottles inside of the appliance.
o If the unit is switched off or unplugged, you must allow at least 5 minutes
before restarting the appliance or reconnecting it to your mains supply.
Turning The Appliance On And Off
BWC3019FS, BWC3832FS, BWC6046FS
,
BWC6038FS
o When the Wine Cooler is connected to the power outlet it will turn on
automatically.
o Press and hold the power button for 10 seconds to turn the
appliance on and off.
Loading ...
Loading ...
Loading ...