1. Home
  2. Philips
  3. Philips GC7635/30 User Manual
  4. Page 29

User Manual - Page 29

For GC7635/30. Series: GC7600 series

Loading ...
Loading ...
Loading ...
29
Problem Possiblecause Solution
EN
The appliance does not produce
any steam.
There is not enough water in the
water tank.
FillthewatertankbeyondtheMINindication.
Press and hold the steam trigger until steam
comes out. It may take up to 30 seconds until
steam comes out.
Youhavenotpressedthesteam
trigger.
Press the steam trigger and keep it pressed when
you iron.
Youhavejustinstalledanew
ANTI-CALC cartridge.
Press and hold the steam trigger for 10 seconds
until steam comes out.
The ANTI-CALC cartridge is not
placed properly.
Press down the ANTI-CALC cartridge until it
locks into position.
Theappliancebeepsandlessor
no steam comes out of the iron
when I press the steam trigger.
YouhavetoreplacetheANTI-
CALC cartridge.
ReplacetheANTI-CALCcartridge(see
ANTI
CALC
).
Youcanalsousedemineralisedwaterordescaled
waterfromtheIronCare.Inthatcase,youneedto
leavetheexhaustedcartridgeinthecompartment.
The ‘ANTI-CALC cartridge
replacement’lightkeepsashing.
YouhavetoreplacetheANTI-
CALC cartridge.
ReplacetheANTI-CALCcartridge(see
ANTI
CALC
).
Youcanalsousedemineralisedwaterordescaled
waterfromtheIronCare.Inthatcase,youneedto
leavetheexhaustedcartridgeinthecompartment.
The appliance produces a loud
pumpingsound(subtlepumping
soundisnormal).
Youhavejustinstalledanew
ANTI-CALC cartridge.
Continue to press the steam trigger until the
pumping sound stops and steam comes out of
the soleplate.
The water tank is empty. Rellthewatertankwithwaterandpressthe
steam trigger until the pumping sound stops and
steam comes out of the soleplate.
The ANTI-CALC cartridge is not
in place.
PlacetheANTI-CALCcartridge(see
).
The ANTI-CALC cartridge is
damaged or shows cracks or
hairline cracks.
Inspect the ANTI-CALC cartridge thoroughly. If
youseeanysignofdamageorcracks,nomatter
howsmall,replacetheANTI-CALCcartridge
with a new one.
The appliance has switched off. The safety auto-off function is
activatedautomaticallywhenthe
steamgeneratorhasnotbeen
used for more than 5 minutes.
Presstheon/offbuttontoreactivatethesteam
generator.
Theironleavesashineoran
imprint on the garment.
Thesurfacetobeironedwas
uneven,forinstancebecauseyou
wereironingoveraseamora
fold in the garment.
Perfect Care is safe on all garments. The shine
or imprint is not permanent and will disappear
whenyouwashthegarment.Avoidironingover
seams or folds or you can place a cotton cloth
overtheareatobeironedtoavoidimprints.
Theironingboardcover
becomeswetorwaterdroplets
come out of the soleplate.
Steam has condensed on the
ironingboardcoverafteralong
ironing session.
Replacetheironingboardcoverifthefoam
materialhaswornout.Youcanalsoaddanextra
layeroffeltmaterialundertheironingboardcover
topreventcondensationontheironingboard.
Youmayhaveanironingboard
that is not designed to cope with
the high steam rate of the steam
generator.
Put an extra layer of felt material under the
ironingboardcovertopreventcondensationon
theironingboard.
There is too much steam
coming out of the iron.
The default setting of the iron is
the OptimalTemp setting. In this
settingtheironprovidesahigh
steam output.
ActivatetheECOmodetoironwithalower
steam output. See
.
4239_000_9429_2_Picture Rich_A5_v1b.indd 29 5/18/15 3:20 PM
Loading ...
Loading ...
Loading ...