Loading ...
Loading ...
Loading ...
setting up your new washing machine _17
01 setting up
STEP 3
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1. Slide the washing machine into position.
2. Level your washing
machine by turning the
leveling feet in and out as
necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water supply hose
1. Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water supply
intake on the back of the machine. Tighten by hand.
The water supply hose must be connected to the
washing machine at one end and to the water tap
at the other. Do not stretch the water supply hose.
If the hose is too short, replace the hose with a
longer, high pressure hose.
2. Connect the other end of the cold water supply hose
to your sink’s cold water tap and tighten it by hand.
If necessary, you can reposition the water supply
hose at the washing machine end by loosening the
fitting, rotating the hose, and retightening the fitting.
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
WF1702XE-02967K_EN.indd 17 2013-2-26 14:59:45
Loading ...
Loading ...
Loading ...