Loading ...
Loading ...
Loading ...
5) If you are going to be using the hood in
extraction mode, you should fit the spigot for
the duct hose onto the main body of the
cooker hood, using the 4 x M4 bolts,
6) If the glass canopy has not been pre-
assembled by the factory, then it should be
fixed to the top of the main body of the
cooker hood at this stage.
7) Lift the main body of the cooker hood onto
the angle bar and then fix it into position using
the 16 x M4 bolts.
o IMPORTANT: This stage of the
installation process MUST be
completed by two people.
o IMPORTANT: The 16 x M4 bolts
MUST be securely tightened.
8) If you are going to be using the hood in
extraction mode, you should fix the ducting
hose to the spigot.
o The electrical connection must
correspond to the electrical
requirement noted on the rating plate,
which is placed inside the cooker hood.
The appliance should now be connected
to the electrical supply. See page 15
for detailed information on the
electrical connection.
o Check that the appliance is operating correctly by selecting each
speed and switching the light bulbs on and off.
21
Loading ...
Loading ...
Loading ...