Loading ...
Loading ...
Loading ...
49-1000470 Rev. 2 27
INSTALLATION INSTRUCTIONS
INSTALLING THE REFRIGERATOR (Cont.)
4
PUT THE REFRIGERATOR IN
PLACE
Move the refrigerator to its final location.
5
LEVEL THE REFRIGERATOR
The refrigerator can be leveled by adjusting the
rollers located near the bottom hinges.
Rollers have three purposes:
• Rollers adjust so the door closes easily when
opened about halfway. (Raise the front about
´>PP@IURPWKHIORRU
• Rollers adjust so the refrigerator is firmly
positioned on the floor and does not wobble.
• Rollers allow you to move the refrigerator
away from the wall for cleaning.
To adjust the rollers on 22’ (33” wide),
25’, and 28’ models:
• Turn the roller adjusting screws clockwise to
raise the refrigerator, counterclockwise to
lowerLW8VHD´KH[VRFNHWRUZUHQFKRU
an adjustable wrench.
Rollers
Raise
Roller adjusting screw
6
LEVEL THE DOORS
A
Adjust the refrigerator door to make the doors
even at the top.
B
To align:
8VLQJD´ZUHQFKWXUQWKHGRRUDGMXVWLQJ
screw to the right to raise the door, to the left to
lower it.
NOTE:
A nylon plug, imbedded in the threads of the
pin, prevents the pin from turning unless a
wrench is used.
After one or two turns of the wrench, open
and close the refrigerator door and check the
alignment at the top of the doors.
'RRUVVKRXOGEHHYHQDWWRS
Raise
´ZUHQFK
5
LEVEL THE REFRIGERATOR
(cont.)
To adjust the
rollers on 22’/25’
CustomStyle
™
models:
Turn the front roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise to
lowerLW8VHD´KH[ZUHQFKZLWKH[WHQVLRQ
or an adjustable wrench.
These models also have rear adjustable
rollers so you can align the refrigerator with
\RXUNLWFKHQFDELQHWV8VHD´KH[ZUHQFK
with extension to turn the screws for the rear
rollers—clockwise to raise the refrigerator,
counterclockwise to lower it.
Roller adjusting screws
Installation Instructions
Loading ...
Loading ...
Loading ...