Loading ...
Loading ...
Loading ...
6 7
5 secs
Product SSID
XXXXX-XXX-XX-XXXXXXXX-XXXX
Product Wi-Fi Password
XXXXXXXX
Mac address
XX:XX:XX:XX:XX:XX
Control
Airflow Sleep timer
Display icons
To operate, point the
remote control toward
the front of the base.
Attach the remote control to the
top of the machine with the buttons
facing down.
Select a high flow of air.
Flashing green = Wi-Fi is ready to connect
to your Dyson Link app
Flashing white = Wi-Fi connecting
Solid white = Wi-Fi connected
Off = Wi-Fi disabled
Solid white = cleaning/below air quality target
Solid green = clean/air quality target has been met
Off = machine is not in auto cleaning mode
Off = appliance is not in night mode
Solid white = machine is in night mode
Select a low flow of air.
Airflow control
Standby
ON/OFF
Auto mode
Oscillation
ON/OFF
Night mode
Sleep timer
To set the sleep timer, select the desired time.
When time reaches zero, the machine will go
into standby mode. To cancel, reduce the time
until two dashes appear.
Poor air quality Air quality target has been met.Air quality improving
When Auto mode is enabled (indicated by an A symbol in the bottom left corner of
the display), the on-board sensors will intelligently adjust the speed of the machine
according to the air quality.
Night mode
Auto mode
If in manual mode, the power will reduce to level 4. When night mode is activated, if it is already below level 4, it will remain the same.
This can be manually changed if desired. The display will illuminate briefly, then fade as before.
When night mode is enabled (indicated by an
illuminated half moon symbol in the top right
corner of the display), the display will dim
and after 5 seconds will fade to off. The half
moon symbol remains illuminated.
The night mode will dim the display and run quietly, making it ideal for use while sleeping.
Setting up Dyson Link app
Select ‘Add a Product’ from within the app
and follow the on screen instructions.
Download the Dyson Link app,
available on iOS and Android.
The machine can be enhanced when connected to the Dyson Link app on your smart device.
For additional control the Dyson Link app can be used to further adjust the sensitivity of the machine.
If the air is clean the A symbol will turn green
and the numerical display will switch off. If
the air quality worsens the A symbol will turn
white and the machine will automatically
restart cleaning the room.
In order to connect the machine,
you will need the information on
the front of this manual.
Auto mode adjusts the power according to the air quality in the room.
If in Auto mode the power will be reduced automatically.
A period of 6 days is required after the machine is first used for the sensor to calibrate. During this period the machine
may be more sensitive to VOCs than normal.
Loading ...
Loading ...
Loading ...