Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
9
EN
CART & GRILL ASSEMBLY
(continued)
3. Open the right door, or pull out both drawers (depending on which Hestan cart you own).
Install the electrical box supplied with your grill (highlighted here in red) on the 2 studs at the
rear, inside wall of the cart. Pass the electrical cord through the square hole. Reinstall both
nuts and tighten with 3/8” wrench or socket wrench.
4. Lay the cord from the electrical box into the strain relief as shown below, leaving 8-9 inches
(20-23cm) of cord between the strain relief and the rear panel. Snap the strain relief together
with a pair of large pliers.
5. Push the strain relief into the rear panel of the cart until it snaps in.
Loading ...
Loading ...
Loading ...