Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
8
EN
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
Some parts have sharp edges. Care must be taken when handling the various components to
avoid personal injury. Wear gloves when handling. Two or more people should work together to
assemble the cart and mount the grill.
TOOLS REQUIRED:
Eye goggles or safety glasses
Work gloves
Large slip-joint pliers
Phillips screwdriver
Flat-blade screwdriver
3/8” wrench or socket wrench
7/16” wrench or socket wrench
LOCATING AND ASSEMBLING THE GRILL AND CART
When determining a suitable location for your grill and cart, take into account concerns such as
exposure to wind, rain, sprinklers, proximity to traffic paths, and keeping any gas supply line runs
as short as possible. The cart should be located on flat pavement or patio surfaces.
Locate the grill only in a well-ventilated area. Never locate the grill in a building, garage,
breezeway, shed or other such enclosed areas without an approved ventilation system. Never
locate the grill over, under, or next to unprotected combustible construction. Please read the
Hestan Grill manual for more information on proper placement.
1. Engage the brakes on the casters to prevent movement of the cart. Ensure all packaging,
straps, etc. have been removed from the grill. Remove all items from inside the grill such
as rotisserie rod, cooking grates, radiant trays, etc. You may leave the burners in place, but
you will have to check them for proper placement later on. If any tie-down wires are on the
burners, leave them on until grill installation is complete.
2. Remove the rear access panel from the cart by removing all the Phillips screws securing it to
the cart.
CART & GRILL ASSEMBLY
Loading ...
Loading ...
Loading ...