Greenworks 25302 User Manual

Loading ...

UNFOLDING AND ADJUSTING HANDLE ASSEMBLY (See Figure 2-3)

To raise handle assembly:

• Open the lower handle locks.

• Pull up and back on the lower handle until it is aligned with the slot between the handle locks

and the mower housing.

NOTE: If the lower handle is difcult to move, turn the lower handle locks counterclockwise to free the handle.

• To secure the lower handle in place, close the lower handle locks.

NOTE: If the lower handle is loose or does not seat completely in the slot, turn the lower handle locks

clockwise to secure the handle.

• Open the upper handle locks.

• Pull up and back on the upper handle to raise it into operating position. Make sure that the

lower handle is seated in the grooves at the bottom of the upper handle.

• To secure the upper handle in place, close the upper handle locks.

NOTE: If the upper handle is loose or separated from the lower handle, tighten the knobs on the upper handle

locks by turning them clockwise.

ASSEMBLY INSTRUCTIONS

Fig. 2

Open

Upper handle lock

Lower handle lock

Open

Loading ...

Greenworks 25302 Battery