Loading ...
Loading ...
Loading ...
12
Connecting the CDC-3.4—Continued
With (Remote Interactive) you can control the
CDC-3.4 together with your other -compatible Inte-
gra/Onkyo AV components. With some Integra/Onkyo
AV receivers you can use one remote controller to con-
trol all your Integra/Onkyo components and use the fol-
lowing special functions:
■ Auto Power On
If your CDC-3.4 is connected to an -compatible Inte-
gra/Onkyo AV receiver, when you turn on the CDC-3.4,
the AV receiver will turn on and select the CDC-3.4 as
the input source.
■ Direct Change
If your CDC-3.4 is connected to an -compatible Inte-
gra/Onkyo AV receiver, when you start playback on the
CDC-3.4, the AV receiver will select the CDC-3.4 as the
input source.
■ Auto Power Off
When you set an -compatible Integra/Onkyo AV
receiver to Standby, all other AV components connected
via enter Standby as well.
■ Dimmer
When you dim the display brightness on an -compat-
ible Integra/Onkyo AV component, the displays on all
other AV components connected via are dimmed as
well.
To use the functions, you need to connect one of the
CDC-3.4’s connectors to an connector on
another AV component in your system by using the sup-
plied cable.
See the manuals supplied with your other -compati-
ble AV components for more information.
Notes:
• Use only cables for connections.
• To use you must make an analog RCA/phono
connection between your CDC-3.4 and Integra/
Onkyo AV receiver even if they are connected digi-
tally.
• The CDC-3.4 has two connectors. You can con-
nect either one to your Integra/Onkyo AV receiver.
The other connector is for connecting additional -
compatible components.
• Connect the CDC-3.4’s connector to only Integra/
Onkyo AV components. Connecting to other manufac-
turer’s AV components may cause them to malfunc-
tion.
• Some Integra/Onkyo -compatible AV components
may not support the special functions described here.
Connections
IR
OUT
IN
RS
232
AC
INLET
RCA/phono audio connecting cable
cable
Hi-fi amp, AV receiver
CD
RL
To use you must make an analog audio connection (RCA/phono)
between the CDC-3.4 and your other Integra/Onkyo equipment even if
they are connected digitally.
Coaxial IN
Coaxial cable (not supplied)
BodyEn.fm Page 12 Friday, September 19, 2003 3:18 PM
Loading ...
Loading ...
Loading ...