Loading ...
Loading ...
Loading ...
45
AUDIO POWER SPECIFICATIONS:
(MHC-BX3 U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
120-10,000 Hz; rates 75 watts per channel
minimum RMS power, with no more than
10% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Canadian model:
MHC-BX3:
Continuous RMS power output (reference)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 35 W)
European model:
MHC-BX3:
DIN power output (rated) 45 + 45 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (reference)
150 + 150 watts
(6 ohms at 1 kHz,
10% THD)
Other model:
MHC-DX3:
The following measured at AC 120, 220, 240 V
50/60 Hz
DIN power output (rated) 75 + 75 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(6 ohms at 1 kHz,
10% THD)
Specifications
continued
Inputs
MD/VIDEO IN: voltage 450/250 mV,
(phono jacks) impedance 47 kilohms
MIC: sensitivity 1 mV,
(mini jack) impedance 10 kilohms
Outputs
PHONES: accepts headphones of
(stereo mini jack) 8 ohms or more
SPEAKER:
MHC-BX3: accepts impedance of 6 to
16 ohms
MHC-DX3: accepts impedance of 6 to
16 ohms
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Laser output Max. 44.6
µ
W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength 780 – 790 nm
Frequency response 2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio More than 90 dB
Dynamic range More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength 660 nm
Output Level –18 dBm
Loading ...
Loading ...
Loading ...