Loading ...
Loading ...
Loading ...
If you received a specific network frequency value to search for
channels, select
Manual
.
Network frequency
With the
Network frequency mode
set to
Manual
, you can
enter the network frequency value received from your cable
provider here. To enter the value, use the number keys.
Frequency scan
Select the method of searching for channels. You can select the
faster
Quick scan
method and use the predefined settings used
by most cable providers in your country.
If this results in having no channels installed or if some channels
are missing, you can select the extended
Full scan
method. This
method will take more time to search for and install channels.
Frequency step size
The TV searches for channels in steps of
8MHz
.
If this results in having no channels installed or if some channels
are missing, you can search in smaller steps of
1MHz
. Using the
1MHz steps will take more time to search for and install
channels.
Digital channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
Select
Off
.
Analogue channels
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels. Select
Off
.
Free / Scrambled
If you have a subscription and a CAM - Conditional Access
Module for pay TV services, select
Free + scrambled
. If you did
not subscribe to pay TV channels or services, you can select
Free channels
only.
For more information, press
Keywords
and look up
CAM -
Conditional Access Module
.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
To check the reception quality of a digital channel . . .
1
- Tune to the channel.
2
- Press
and select
Setup
and press
OK
.
3
- Select
Channel settings
>
Channel installation
>
Digital :
reception test
and press
OK
.
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select
Search
and press
OK
.
To enter a specific digital frequency yourself, use the remote
control digit keys. Alternatively, select the frequency, position the
arrows on a number with
and
and change the number with
and
. To check the frequency, select
Search
and press
OK
.
If you use DVB-C to receive channels, the option
Symbol rate
mode is
available. For Symbol rate mode, select
Automatic
,
unless your cable provider gave you a specific symbol rate value.
To enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
>
Channel installation
>
Analogue :
Manual installation
and press
OK
.
•
System
To set up the TV system, select
System
and press
OK
.
Select your country or the part of the world where you are
now.
•
Search channel
To find a channel, select Search channel and press
OK
. Select
Search
and press
OK
. You can also enter a frequency yourself. If
the reception is poor, press
Search
again. If you want to store
the channel, select
Done
and press
OK
.
•
Fine tune
To fine tune a channel, select
Fine tune
and press
OK
. You can
fine tune the channel with
or
.
If you want to store the channel found, select
Done
and press
OK
.
•
Store current channel / Store as new channel
You can store the channel on the current channel number or as
a new channel number.
Select
Store current channel
or
Store as new channel
.
You can redo these steps until you have found all available
analogue TV channels.
34
Loading ...
Loading ...
Loading ...