Loading ...
Loading ...
Loading ...
11OPERATING INSTRUCTIONS
To delay stop(or start), press the Timer
button when the unit is power-on(or
power-o), then the "timer o" indicator(or
"timer on" indicator) will illuminate. Then
adjust timer setting, tap or hold the UP
arrow ( ) or the DOWN arrow ( ) to
change delay timer at 0.5 hour increments,
up to 10 hours, then at 1 hour increments up
to 24 hours. The setting will be confirmed
automatically in 5 seconds, then the control
will count down the time(8, 7.5, 7, etc.) left,
and all other settings will remain the same
as they were before the timer setting is
confirmed, until stop(or start).
Setting combination of “delay stop
delay start” or “delay start delay stop”
is workable. Both "timer o" indicator and
"timer on" indicator will illuminate then. The
timer setting can be canceled by either
pressing and holding the timer button for 2
seconds, or pressing the power on/o
button at any time to turn o the unit
directly.
PRESS FILTER
RESET BUTTON
DO THIS:
TIMER: DELAY STOP/START FEATURE:
YOU WILL SEE HOW MUCH TIME IS
CHOSEN:
PRESS UP/DOWN
BUTTONS
THEN DO THIS:
PRESS TIMER
BUTTON
FIRST DO THIS:
turn off
turn on
Note: This feature can be used with any
combination of FAN Speeds (Low speed
only on 8000 BTU models), Timer, or Sleep
Modes. When in the "Heat" mode,the fan will
run continuously while heat is needed. The
temperature will automatically be
maintained anywhere between 55 °F(13 °C)
and 80 °F(27 °C) (The upper limit of
temperature could reach 86°F(30 °C) on
some of the 115V models.). When the room
set temperature is satisfied, the fan will
cycle o and on to circulate and sample the
room air.
HEATING FEATURE:
YOU WILL SEE:
PRESS MODE BUTTON
CHOOSE DRY
DO THIS:
Loading ...
Loading ...
Loading ...