Loading ...
Loading ...
Loading ...
59
Anti-lock Brake System (ABS)
Indicator
Basic Operation & Riding
Braking
(VT1300CRA/CTA)
Normally, Anti-lock Brake System (ABS)
indicator comes on when the ignition is
turned ON, and goes off after you ride the
motorcycle at speed above 6 mph (10
km/h). If there is an ABS problem, the
indicator comes on and remains on. The
ABS system does not operate when the
ABS indicator is on.
If the ABS indicator comes on while
riding, stop the motorcycle in a safe place
and turn off the engine.
Turn the ignition ON again. The indicator
should come on, and go off after you ride
the motorcycle at speeds above 6 mph (10
km/h). If it does not go off, ABS is not
functioning, but the brakes still work as
part of the Combined Braking System and
provide normal stopping ability. However,
you should have the system checked by
your dealer as soon as possible.
The ABS indicator may come on if you
turn the rear wheel while the motorcycle is
upright on the stand. This is normal. Turn
the ignition OFF, then turn it ON. The
indicator should come on, then go off
after you run the motorcycle above 19
mph (30 km/h).
１０／０９／０８ １５：４７：１５ ３１ＭＦＹ６１０ ００６８
Loading ...
Loading ...
Loading ...