Loading ...
Loading ...
Loading ...
−
−
19 lbf·ft (26 N·m , 2.7 kgf·m)
22 lbf·ft (30 N·m , 3.1 kgf·m)
3.9 US qt (3.7
)
105
Engine Oil & Filter
Servicing Your Honda
Add Engine Oil:
Install the new oil filter and tighten it by
hand.
Using an oil filter wrench attachment
and a torque wrench, tighten the new oil
filter to the specified torque:
Fill the crankcase with the
recommended oil (page ),
approximately:
Install the oil fill cap/dipstick securely.
Check the condition of the sealing
washers on the drain bolts. Replace the
washers every other time the oil is
changed.
Install the drain bolts and tighten them
to the specified torque:
Start the engine and let it idle for 3 5
minutes.
Stop the engine and wait 2 3 minutes.
Hold the motorcycle upright and check
that the oil level is at the upper level
mark on the oil fill cap/dipstick
(page ).
Check that there are no oil leaks.
If a torque wrench is not used for
installation, see your dealer as soon as
possible to verify proper assembly.
8.
9.
10.
12.
13.
14.
15.
16.
11.
98
101
１０／０９／０８ １５：５２：５３ ３１ＭＦＹ６１０ ０１１４
Loading ...
Loading ...
Loading ...