V-Tac VT-6005 LED Tube T5 8W 60 cm White

INSTALLATION INSTRUCTION - Page 2

For VT-6005. Also, The document are for others V-Tac models: VT-1225

PDF File Manual, 14 pages, Read Online | Download pdf file

Loading ...
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC LED Glass Tube. V-TAC will serve you the best.
Please read these instructions carefully before starting the installing and keep this manual
handy for future reference. If you have any another query, please contact our dealer or local
vendor from whom you have purchased the product. They are trained and ready to serve you
at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not
apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of
the product. The products are suitable for 10-12 hours daily operation. Usage of product for 24
hours a day would void the warranty. This product is warranted for manufacturing defects only.
PRODUCT INTRODUCTION
Thank you for selecting and buying V-TAC LED Glass Tube, which is equipped with the most
advanced lighting technology today, offering the most significant energy saving, environmental
protection, long life span with no maintenance required. It has 100% better efficiency and
significantly better brightness than any other old fixtures.
PRODUCT OVERVIEW
Power saving, no maintenance, easy to install, high efficiency, low energy consumption, long
life span, low temperature and no bad glare.
APPLICATION AND USES
The LED glass tube can be used in hotels, offices, factories, conference rooms, meeting rooms,
commercial complexes, residential buildings, schools, colleges, universities, hospitals, etc.
Suitable for Maximum use of 10-12 hours Daily Usage of the product for 24 hours would void
the warranty
INSTALLATION REQUIREMENTS
• Installation should only be done by a certified electrician
• Operation environment temperature: from -20°C to +45°C
• Do not use DC electricity
• Do not use with electronic ballasts and magnetic ballasts
• Do not modify the fitting to be used with the LED Tube.
• This lamp is not suitable to be used in emergency
luminaires designed for double-capped fluorescent lamp(s).
INSTALLATION INSTRUCTIONS
ENGLISH
LED Tube
Electronic ballast
N
L
L
N
LED Tube
Electronic ballast
N
L
L
N
PACKING:
• LED Tube (1PC)
• Instruction Manual (1PC)
Electronic ballast replacement method
for single tube.
Note: LED Tube is powered on single
side only
1. Switch off the power before starting the
installation.
2 & 3. To remove the old tube from the fitting,
rotate the tube (90°) counterclockwise. [Ensure
that electronic ballast and starter are removed
from the fittings].
4. Replace the conventional lamp into the fitting
with the LED Lamp.
5. Rotate the LED Tube by 90° clockwise to
secure the position of the LED Tube.
6. Switch on the power to test the light.
FOLLOW DIAGRAM BELOW:
Please remove the electronic ballast
and fluorescent lamp and before
installing the LED Tube
Loading ...
Loading ...
Loading ...