Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
9
OPERATING METHODS
Description of Functions
SETTING TIMER OFF
When the dehumidier is running, press the [Timer key] to adjust time from 1h to
24h, press the key once to increase the setting time by 1h, after the setting time
exceeds 24h, the gure returns to 1 to start cycle. The Timer key can also be pressed
all the time, the time increases and changes circularly, when the set time expires,
the dehumidier turns o automatically. After the setting is completed, if the Timer
key does not act at all within 5s, the set time is conrmed. In timer o state the key
lamp on the [Timer key] is normally on.
SETTING TIMER ON
When the dehumidier is in standby state, the method for adjustment of setting
time by the [Timer key] is the same as timer OFF. After the setting is completed,
if the Timer key does not act at all within 5s, the set time is conrmed. In timer ON
state the key lamp on the [Timer key] is normally on, and the set time is displayed
on control panel.
AUTO MODE
Select AUTO dehumidication, if the room humidity is high than the set humidity
or is between +5% or -5% of the set humidity, the compressor will starts and the
fan will run at the set speed. If the room humidity is lower than the set humidity by
-5%, then the compressor will stop but the fan will run at the set speed.
The default set humidity value is 50%.
CONTINUOUS MODE
Select CONTINUOUS dehumidication, no matter how the relative humidity in the
room is, the compressor starts, the fan runs at high speed in default, and the air
speed can be regulated via the air speed key.
INSIDE DRYING MODE
Press the [Inside drying key] to start drying in the dehumidier, and the
whole drying procedure needs approximate 1h:
1. The dehumidier starts at HIGH fan speed and releases air continuously for 30min;
2. The dehumidier turns to run at LOW fan speed and lasts for 20min;
Loading ...
Loading ...
Loading ...