Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
13
TROUBLESHOOTING
If the following problems occur to the dehumidier, the following solutions
can be adopted.
Symptoms
The unit does not
turn ON
Possible reasons Solutions
Power cord is unplugged
Plug the power cord properly
into the power socket.
The water tank is full.
Water tank is not placed properly.
Drain water from the water
tank, and then install the
water tank again.
The ambient temperature is lower
than 5°C or higher than 32°C
Normal phenomenon
The dehumidi-
cation function is
not eective
Is the room temperature or
humidity too low?
In dry season the dehumidi-
cation ability will reduce.
Are the air outlet & inlet blocked?
Clean up the objects blocking
the air outlet and inlet.
Air is not blown out Is the air lter net blocked?
Clean the air lter net according
to the above method.
Noise is abnormal
during operation
Is the dehumidier placed improperly
so that it is inclined or unstable?
Place the dehumidier in a
smooth place.
Is the air lter net blocked?
Clean the air lter net according
to the above method.
There is “tittering” sound
The owing sound of
refrigerant, which is a normal
phenomenon.
Water leaks
Connection of drainage pipe
becomes loose
Fasten drainage pipe.
Drainage system is blocked
Remove obstacles and
straighten out water pipe.
Frosting occurs
The ambient temperature is low,
and it is in the state waiting for
defrost.
It is a normal phenomenon,
and the dehumidier has the
automatic defrosting function.
Display Code Error
FL The water tank is full
E1 The coil sensor detects anomaly
E2 The room temperature sensor detects anomaly
P1 The unit is in the defrosting state, normal
CL The unit is in internal drying state, normal
LC Child lock funtcion starts
Loading ...
Loading ...
Loading ...