Loading ...
Loading ...
Loading ...
8
OPERATION INSTRUCTIONS
USING THE TOUCH CONTROLS
• The controls respond to touch, so you
don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
• Make sure the controls are always
clean, dry, and that there is no objects
covering them.
BEFORE FIRST USE:
1) Unpack the appliance and remove the filter
cover from the front of the unit by pulling
both sides of the cover at the top and then
lifting away from the base.
2) Remove the filters from the plastic
protective packaging
3) Install the activated Carbon and Photo
Catalyst filter into the front of the unit.
4) Install the HEPA filter into the front of the
unit.
5) Install the pre filter into the front of the unit.
6) Replace the filter cover on the side of the
appliance, ensuring it clicks into place.
7) Connect the plug to an earthed socket
Loading ...
Loading ...
Loading ...