Loading ...
Loading ...
Loading ...
10
AUTO BUTTON
Press to activate auto mode, the fan speed will be automatically
adjusted based on the air quality.
Please note:
• The features (Ioniser and UV Light) cannot be used in
auto mode.
• After selecting Auto mode the unit will take approx. 3
minutes to monitor the air before the mode becomes
active.
AIR QUALITY
DISPLAY
The unit utilises a PM2.5 sensor to measure the air quality. When
turning on the unit will take around 90 seconds before showing
the air quality on the screen.
FILTER
REPLACEMENT
INDICATORS
The display will show when the filters require replacement.
Replace the filters then press the Reset button to reset the filter
life monitor
ADJUSTMENT
OF THE PM 2.5
READING
If the reading for the air quality is abnormal, this may be caused
by particles attached to the sensor. To correct the reading press
and hold the Settings button until a bleep is heard. Then use the
Auto and Settings buttons as Up and Down to adjust the value.
DIGITAL DISPLAY
During use the display panel will automatically cycle through showing the Temperature, Humidity,
Timer Duration and Air quality (PM) figures.
TEMPERATURE
HUMIDITY
TIMER DURATION
AIR QUALITY
Loading ...
Loading ...
Loading ...