Loading ...
Loading ...
Loading ...
8
Tip
You can optimise the audio output (see ‘Adjust settings’ •
> [Audio Setup] > [Analogue Output]) for details.
Connect USB fl ash drive
1 Connect a USB fl ash drive to the jack on
this product.
Note
This product can only play/view MP3, WMA, DivX or •
JPEG fi les that are stored on a USB fl ash drive.
Press the
• button to access the content and play
the fi les.
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back
of the product.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.•
1 Connect the AC power cable to the wall
socket.
The product is ready to be set up for use.»
4 Get started
Prepare the remote control
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
Connect audio cables
Connect the audio from this product to the TV to
allow sound output through the TV.
1 Connect the audio cables (not supplied) to:
the • AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.•
Route audio to other devices
Route the audio from this product to other devices
to enhance audio play.
Connect to digital amplifi er/receiver
1 Connect a coaxial cable (not supplied) to:
the • COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on •
the device.
Connect analogue stereo system
1 Connect the audio cables (not supplied) to:
the • AUDIO OUT L/R jacks on this
product.
the audio input jacks on the device.•
AUDIO IN
DIGITAL IN
COAXIAL
DIGITAL
OUT
AUDIO IN
EN
Loading ...
Loading ...
Loading ...