Loading ...
Loading ...
Loading ...
9
Heating elements
Residual heat indicator
The cooktop is equipped with a residual heat indicator
for each element. It shows you which elements are still
hot. Avoid touching the indicated elements.
If an • is shown on the display, the element is still hot.
You could use it, for example, to keep a small quantity of
food warm or to melt a chocolate coating. As the element
continues to cool, the display changes to œ. The display
goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on
after a power failure. The display lights up for
approximately 30 minutes.
Element Turning on and off
$
Single element Always use cookware of a suitable size.
ð
Dual element The size of these elements can be matched to your pan size. The heating
element must be turned on.
Turning off the outer heating ring: Touch
ö. The ð display will turn off.
Adding: Touch ö again. The ð display will turn on.
ò
Triple element (NETP666SUC only) On this element you can turn the medium and large heating rings off. The
heating element must be turned on.
Turning off the outer heating ring: Touch
ö. The ò display will turn off.
Turning off the middle heating ring: Touch ö again. The ð display will
turn off.
When you turn the heating element on again, all of the heating rings will be
on.
à
Bridge element (NETP666SUC only) The Bridge element combines two individual heating elements into one long
griddle zone. This configuration is ideal for griddles and large pans.
Note: Do not use cookware larger than 17" x 10" (432 x 254 mm).
Turning on the Bridge element: Touch one of the two $ touch keys for
selecting the heating element, then touch the à key. The à symbol will
appear; both heating elements are now selected. ‹ appears in both dis-
plays. Within the next 10 seconds select the desired heat setting (1-9). The
Bridge element and both individual heating elements are now on.
Changing the heat setting: Touch one of the two $ touch keys for select-
ing the Bridge element, and set the new heat level within the next
10 seconds.
Turning off the Bridge element feature: Touch one of the two $ touch
keys for selecting the Bridge element, and select 0 from the number keys.
‹ appears in both displays. The heating elements will turn off and the resid-
ual heat indicator will appear.
Loading ...
Loading ...
Loading ...