Loading ...
Loading ...
Loading ...
The wire is long enough to guide the socket
down and through between any heat shield
that may be installed and the bumper.
4. Replace defective bulb.
5. To install the new bulb, proceed in reverse
order of removal.
Right fog lamp:
1.
Turn the bulb socket counterclockwise and
remove.
The wire is long enough to guide the socket
down and through between any heat shield
that may be installed and the bumper.
2. Replace defective bulb.
3. To install the new bulb, proceed in reverse
order of removal.
Side turn signal, bulb replacement
Follow the general instructions on lights and
bulbs, refer to page 200.
Bulbs:
▷ With orange lens: W5W
▷ With white lens: WY5W diadem
1. Pull the turn signal housing at the top out
of the catch, then unhook it at the bottom.
2. Turn the bulb socket counterclockwise and
remove.
3. Replace the bulb.
4. Proceed in the reverse order to insert the
new bulb and install the turn signal hous‐
ing.
First hook the turn signal housing to the
bottom, then at the top press it into the
latch.
Changing wheels
Hints
When using run-flat tires or tire sealants, a tire
does not need to be changed immediately in
the event of pressure loss due to a flat tire.
Which is why no spare tire is available.
The tools for changing wheels are available as
accessories from your service center.
Seite 206
MOBILITY
Replacing components
206
Online Edition for Part no. 01 40 2 961 140 - II/15
Loading ...
Loading ...
Loading ...