Loading ...
Loading ...
Loading ...
41
Function Description
3D Settings See "Using the 3D functions" on page 31 for details.
HDMI Settings See "Changing HDMI input settings" on page 21 for details.
Lamp Settings
Lamp Mode
See "Setting Lamp Mode" on page 45 for details.
Reset Lamp Hours
Resets the lamp timer after new lamp is installed. For
changing the lamp, please contact qualified service personnel.
Lamp Hours
See "Getting to know the lamp hour" on page 45 for details on
how the total lamp hour is calculated.
Filter Settings
See "Using the dust filter (optional accessory)" on page 43 for
details.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting On enables the function and the projector
will automatically switch the lamp mode between normal and
economic modes according to the input image detected.
This function is only available when a PC input signal is
selected.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during
operation.
Closed Caption
Selects a preferred closed captioning mode when the selected
input signal carries closed captions.
• Captions: An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are
closed captioned (usually marked as "CC" in TV listings).
This function is only available when a Composite video
input signal is selected and its system format is NTSC.
Caption Version
To view captions, select CC1, CC2, CC3, or CC4 (CC1
displays captions in the primary language in your area).
Reset Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Corner
Adj., Phase, H. Size, OverScan, Language, Projector
Position, High Altitude Mode, Security Settings, Remote
Control Code, 3D Sync, Filter Mode, HDMI Settings.
5. ADVANCED menu
Loading ...
Loading ...
Loading ...