Nooie Smart LED Bulb
Quick Start Guide
Product Overview
Setup
Product Overview
1. Scan the QR codes or go to the App Store to
download the Nooie Home app.
2. Install the LED light bulb and turn on the device.
3. Follow the instructions in the app to connect the
device to your network.
Specifications
Model: LB126
Base Type: E26
Brightness: 800 lumens
Rated Voltage: AC 120V, 60Hz
Energy Used: 10 watts
Light Appearance: 2800K~6000K
Wi-Fi Requirement: 802.11 b/g/n, 2.4GHz
LED Colors: 16 Million Colors
Estimated Yearly Cost: $1.20 (Based on 3 hrs/day)
Life: 22.8 Years (Based on 3 hrs/day)
Product Features
LED
E26 Socket
2.4G
Wi-Fi
Schedule
& Timer
Voice
Control
APP
Control
Light
Recipes
Vibrant
Colors
Energy
Saving
Easily
Dimmable
Customer Care
Have any questions?
Check out the FAQ on our website：
www.nooie.com/support
Want to give your feedback?
Tag us #nooie on social media.
Need more help?
Contact us at [email protected]
Warning
1. Make sure that the power is off when installing, removing, or examing the light bulb.
2. Before using this product, please make sure that your voltage is appropriate for the product’s working
voltage. Using this product with a voltage other than the one specified may damage the product and cause
safety hazards.
3. Do not disassemble this product, as the light diodes can cause damage to the eyes.
4. Use your smart light bulb in indoor environments only.
5. Use in dry locations only.
6. The light bulb will heat up when working.
Do not use it in a confined holder for an extended period of time. Ensure sufficient ventilation for the light
bulb to allow for heat dissipation.
7. The light source of this product is nonchangable light diodes (LED).
8. The optical radiation of this LED light product complies with the “Exemptions and Requirements”
of IEC 62471-2006.
9. Do not use with dimmers.
10. NOT FOR EMERGENCY LIGHTING.
1. 30-day return policy and a two-year
limited warranty.
2. Timely customer service via
3. Lifetime technical support provided by Nooie.
Warranty Terms
Nooie Aurora only supports 2.4GHz Wi-Fi network.
FCC COMPLIANCE STATEMENTS
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
ISED COMPLIANCE STATEMENTS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may causeundesired operation of
the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d’en
compromettre le fonctionnement.
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
CAN ICES-005 (B) / NMB-005 (B)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the
radiator and your body.
RF Exposure Statement
Cet équipement est conforme aux limites d'exposition aux radiations de la FCC définies
pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur
et votre corps.
Déclaration d'exposition RF
Works with
* Please see instructions in the app under the device settings to connect your device to the supported
third-party controls.
“THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS”or “NOT FOR EMERGENCY LIGHTING”；
