Loading ...
Loading ...
Loading ...
7
2. Connect the other end of the high-pressure hose to
the water outlet on the pressure washer (Fig. 4). First,
push the high-pressure hose end completely onto the
high-pressure water outlet, then screw it on clockwise.
mWARNING! Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
Before Using
Charging Procedure
The battery charger supplied matches the lithium-ion battery
installed in the tool. Do not use other battery chargers.
The lithium-ion battery is protected against deep discharging.
When the battery is empty, a protective circuit will
automatically switch OFF the machine.
Charge the battery for up to 1.5 hours then use it until it runs
down. Recharge for up to 1.5 hours again before resuming
operation.
The pressure washer is equipped with a battery capacity
indicator. To check the battery capacity, push the button
(Fig. 5). The charge indicator system indicates the battery
status of the pressure washer as the table shows below.
Battery Charging
The battery in this pressure washer has been designed to
provide maximum trouble-free life. However, like all batteries, it
will eventually wear out. To obtain the longest possible battery
life, we suggest the following:
• Store and charge your pressure washer in a cool area.
Temperatures above or below normal room temperature
will shorten battery life.
• Never store the pressure washer with the battery in a
discharged condition. Recharge the unit before storage.
• All batteries gradually lose their charge. The higher the
temperature is, the faster they lose their charge. If you
store your pressure washer for long periods of time
without using it, recharge the battery every 6 months. This
will extend battery life.
• To increase the battery life, do not recharge the unit
immediately if it's stopped working. Wait for 30 minutes to
begin the charging process.
NOTE: The pressure washer has been shipped in a low charge
condition and should be fully charged before use.
1. Plug the charger into the charging socket of the pressure
washer. Connect the charger plug into an appropriate AC
RELEASE
Push to release
Trigger gun
Fig. 3
High-pressure hose
R
Fig. 4
Water outlet
High-pressure hose
Push the button
to check the
battery capacity
Fig. 5
LED indicator
Charge level button
The battery is at 30% capacity and requires
charging
The battery is at 50% capacity and requires
charging soon
The battery is at 75% capacity and requires
charging soon
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...