Loading ...
Loading ...
Loading ...
6 IT
6 EN
SUPER OPTIONFREEZING / SUPER OPTION - COMBINED ELECTRONIC FREEZER
SUPER OPTIONFAULTS AND ERRORS - COMBINED ELECTRONIC
Every error or fault will be automatically shown in the display which will indicate a number preceded by the letter „E” (Error). In this case, try
switching the product off and back on again. If the error persists, contact the technical assistance.
In case of products equipped with NO FROST technology, after a power-cut, the message „PF” (Power Fail) will be shown on the display. In
case of a power-cut lasting over 10-12 hours, check that the foodstuffs has remained unchanged in order to consume it within 24 hours or
proceed to cook it or freeze it.
(Figure 4)
(Figure 5)
(Figure 3)
Off On
ELECTRONIC products without NO FROST technology: Press the (+) button in order to activate the SUPER function. Place the foods to
be frozen into the freezer compartment. At the end of the preset time, the product will automatically exit the SUPER function. If you wish to
interrupt the SUPER function in advance, press the (-) button.
ELECTRONIC products with NO FROST technology: Press the (+) button in order to activate the SUPER function. After 8 hours, place the
foods to be frozen in the freezer compartment. At the end of the preset time, the product will automatically exit the SUPER function. If you
wish to interrupt the SUPER function in advance, press the (-) button.
The rating plate states the maximum quantity of foods that can be frozen (see fi gure 6).
Press the mode button repeatedly until the message SUPER is displayed.
In case of a power-cut lasting over 10-12 hours, check that the foodstuffs has remained unchanged in order to consume it within 24 hours or
proceed to cook it or freeze it.
COMBINED MECHANICAL - WITHOUT DISPLAY
CONTROL PANEL - COMBINED MECHANICAL
FREEZING OF THE FREEZER COMPARTMENT - COMBINED MECHANICAL
The thermostat box to control the appliance is located inside the fridge compartment
on the top right. To check whether the appliance is functioning, make sure that the
thermostat knob is not set on "0". Adjust the knob according to the desired temperature
in the fridge.
In this product the freezer compartment is automatically defrosted.
In products without NO FROST technology, the presence of a slight layer of frost or
drops of water when the freezer is working is normal.
Make sure the water outlet is always clean. Make sure foods do not touch the back or
sides of the fridge compartment
Important: If the room temperature is very warm, appliances without NO
FROST technology may work continuously and a layer of frost will deposit
on the back of the fridge compartment. In this case, turn the knob to lower
settings.
Place the foods to be freezer drawer, at the start of the freezing process, therefore not making the fridge compartment excessivley cold, it may be
necessary to turn the thermostat knob up or down, according to the load and room temperature. Once the freezing process is completed, return the
thermostat knob to the usual value. The rating plate states the maximum quantity of foods that can be frozen, (see fi gure 6).
In the case of a fridge without electronic display, open the top door of the fridge in order to reach the control panel (thermostat box).
Loading ...
Loading ...
Loading ...