Loading ...
Loading ...
Loading ...
13
2.a
Mark the wall where indicated, 10 7/16" above the horizontal line and at 6 1/2" distance on the left and
right of vertical line. Checking that the two marks are level.
Insert two wall plugs and two screws into the holes as shown not completely (purchased separately).
Mark the wall where indicated, 3 15/16" above the horizontal line and at 9 1/16" distance on the left and
right of vertical line. Checking that the two marks are level.
Insert two wall plugs (purchased separately).
Place a bracket 7.2.1 on the wall as shown about 1 1/8" from the ceiling or upper limit, aligning the center
(notch) with the vertical reference line and mark the wall at the centers of the holes in the bracket.
Place the second bracket 7.2.1 on the wall as shown, below the rst bracket, at the height of the upper
chimney section supplied and aligning the center (notch) with the vertical line.
Mark the wall at the centers of the holes in the bracket and drill ø 5/16" as shown.
Installation screws provided for the Brackets, must be secured with wall plugs (purchased separately).
KMC30X
KMC30BI
KMC30NE
10 7/16"
3 15/16"
6 1/2" 6 1/2"
9 1/16" 9 1/16"
1 1/8”
>
Ø 5/16”
Min.
24"
2.1
Min.
30"
2.1
x8
7.2.1
x8
1
5 6
7 8
7 8
5 6
3 4
1 2
3 4
2
7 8
5 6
3 4
1 2
30"
Loading ...
Loading ...
Loading ...