Loading ...
Loading ...
Loading ...
971101
*9001195556*
9001195556
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
Germany
www.bosch-home.com
- [en] Instructions for installation and use
- Table of contents
- [en] Instructions for installation and use
- Installation instructions 14
- ( Important safety information 14
- K General information 15
- 5 Installation 16
- Instruction manual
- Additional information on products, accessories, replacement parts and services can be found at www.bosch-home.com and in the online shop www.bosch-eshop.com
- 8 Intended use
- Intended use
- Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
- The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
- This appliance is intended for domestic use and the household environment only. The appliance is not intended for use outside. Do not leave the appliance unattended during operation. The manufacturer is not liable for damage which is caused by improp...
- This appliance is intended for use up to a maximum height of 2000 metres above sea level.
- This appliance may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge if they are supervised by someone who is responsible for their sa...
- Children must not play with the appliance.Cleaning and user maintenance must not be performed by children unless they are over 15 years of age and are supervised.
- Keep children below the age of 8 years old at a safe distance from the appliance and power cable.
- Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
- This appliance is not intended for operation with an external clock timer or a remote control.
- ( Important safety information
- Important safety information
- : Warning
- : Warning
- : Warning
- : Warning
- : Warning
- : Warning
- Causes of damage
- Caution!
- Always replace faulty bulbs to prevent the remaining bulbs from overloading.
- Risk of damage due to ingress of humidity into the electronic circuitry. Never clean operator controls with a wet cloth.
- Surface damage due to incorrect cleaning. Clean stainless steel surfaces in the direction of the grain only. Do not use any stainless steel cleaners for operator controls.
- Surface damage due to strong or abrasive cleaning agents. Never use strong and abrasive cleaning agents.
- Risk of damage as a result of incorrect loading of design elements. Do not pull design elements.Do not place objects on the design elements or hang objects from them.
- 7 Environmental protection
- 1 Operating the appliance
- Operating the appliance
- These instructions apply to several appliance variants. It is possible that individual features are described which do not apply to your appliance.
- Note:
- Control panel model 1
- Setting the fan
- Intensive setting
- Fan run-on time
- Automatic mode
- Sensor control
- In automatic mode, the PerfectAir sensor in the extractor hood detects the intensity of the cooking and roasting odours. Depending on the setting of the PerfectAir sensor, the fan automatically switches itself to another fan setting.
- Possible sensor settings:
- Default sensitivity setting: „ (fan setting 3)
- Lowest sensitivity setting: ‚ (fan setting 1)
- Highest sensitivity setting: † (fan setting D)
- If the sensor controller responds too strongly or not enough, it can be changed accordingly:
- 2. The sensor controller setting can be changed by touching symbols 1, 2, 3, C or D.
- 3. Take your finger off the > symbol.
- Saturation display
- If the metal grease filters or activated charcoal filter are/ is saturated, the corresponding symbols will flash once the appliance has been switched off:
- If you have not yet done so, the metal grease filters should now be cleaned or the activated charcoal filter replaced. ~ "Cleaning and maintenance" on page 10
- The saturation indicators can be reset while they are flashing. To do this, touch the # symbol.
- Switching over the display for air recirculation mode
- For air recirculation mode, the electronic controller must be switched over accordingly:
- Lighting
- Audible signal
- e Connecting to a hob
- Connecting to a hob
- You can connect this appliance to a hob (if the hob supports connection to the appliance) and then control the functions of the hood via your hob.
- Appliances can be connected to each other in different ways:
- Home Connect
- Two appliances can be connected using the Home Connect app provided that both of them are Home Connect compatible.
- Refer to the Home Connect documents supplied for more information.
- Connecting appliances directly
- If the appliance is connected directly to a hob, it cannot be connected to your home network as well. The appliance will function as an extractor hood that is not connected to the network and you can continue to operate it via the control panel.
- Connecting appliances via your home network
- If the appliances are connected to each other via your home network, both the hood controls on the hob and Home Connect can be used to operate the appliance.
- Notes
- Setting up a connection
- The hood must be switched off before you can connect the hob and extractor hood.
- Connecting directly
- Notes
- Connecting via your home network
- Follow the instructions in the section entitled "Automatic login to your home network" or "Manually logging into your home network" ~ "Home Connect" on page 8
- Once the extractor hood is connected to your home network, you can connect to the hob via the Home Connect app. To do this. follow the instructions on your mobile device.
- o Home Connect
- Home Connect
- This appliance is Wi-Fi-capable and can be controlled using a mobile device.
- If the appliance is not connected to your home network, it will function as an extractor hood with no network connection and can still be operated via the display.
- The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country.You can find more information on this at www.home-connect.com.
- Notes
- Setting up
- To implement settings via Home Connect, you must have installed and set up the Home Connect app on your mobile device.
- Refer to the Home Connect documents supplied for more information.
- Follow the steps specified by the app to implement the settings.
- The app must be open in order to perform the set-up process.
- Note:
- Automatic registration in the home network
- Notes
- 2. Press "1" to start automatic login to your home network.
- 3. Press the WPS button on the router within the next 2 minutes.
- 4. On your mobile device, follow the instructions for automatic network login.
- 2. Press "2" to manually log into your home network.
- 3. Use the "Home Connect" SSID and the "Home Connect" key to log the mobile device into the extractor hood network.
- 4. On your mobile device, follow the instructions for manually logging into your network.
- 2. On your mobile device, follow the instructions in the Home Connect app.
- Software update
- Using the software update function, your extractor hood's software can be updated (e.g. for the purpose of optimisation, troubleshooting or security updates). To do this, you need to be a registered Home Connect user, have installed the app on your m...
- As soon as a software update is available, you will be informed through the Home Connect app and will be able to start the software update via the app.
- Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are on your local area network.
- The Home Connect app will inform you once installation is complete.
- Notes
- Resetting the connection
- About data protection
- When your appliance is connected for the first time to a WLAN network, which is connected to the Internet, your appliance transmits the following categories of data to the Home Connect server (initial registration):
- This initial registration prepares the Home Connect functions for use and is only required when you want to use these Home Connect functions for the first time.
- Note:
- Declaration of Conformity
- Robert Bosch Hausgeräte GmbH hereby declares that the appliance which features Home Connect is in accordance with the basic requirements and the other relevant provisions of the directive 2014/53/EU.
- A detailed RED Declaration of Conformity can be found online at www.bosch-home.com/de on the product page for appliance in the additional documents.
- 2 Cleaning and maintenance
- Cleaning and maintenance
- : Warning
- : Warning
- : Warning
- : Warning
- : Warning
- Cleaning agents
- Removing metal grease filter
- 1. Open the lock and swing down the metal grease filter. When you do this, take hold of the metal grease filter from underneath with your other hand.
- 2. Take the metal grease filter out of the holder.
- 3. Clean the metal grease filter.
- 4. Clean the appliance support cables.
- 5. Clean the accessible parts of the housing. Clean the inside of the appliance.
- : Warning
- Cleaning the metal mesh grease filters
- : Warning
- Installing the metal mesh grease filter
- : Warning
- Replacing the activated charcoal filter
- 3 Trouble shooting
- 4 Customer service
- Customer service
- When calling us, please quote the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. These numbers can be found on the rating plate on the top of the appliance (to access it, you will need to...
- You can make a note of the numbers of your appliance and the telephone number of the after-sales service in the space below to save time should it be required.
- E no.
- FD no.
- Please be aware that a visit by an after-sales engineer will be charged if a problem turns out to be the result of operator error, even during the warranty period.
- Please find the contact data of all countries in the enclosed customer service list.
- To book an engineer visit and product advice
- Accessories
- ( Important safety information
- Important safety information
- Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.
- Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.
- The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
- Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under warranty.
- The surfaces of the appliance are easily damaged. Avoid damaging them during installation.
- For the installation, observe the currently valid building regulations and the regulations of the local electricity and gas suppliers.
- : Warning
- : Warning
- : Warning
- : Warning
- : Warning
- : Warning
- K General information
- General information
- Preparing the ceiling
- Electrical connection
- : Warning
- : Warning
- Risk of electric shock!
- The required connection information can be found on the rating plate inside the appliance; to access it, you will need to remove the activated charcoal filter.
- Length of the cable: approx. 1.30 m
- This appliance complies with the EC interference suppression regulations.
- The appliance must be disconnected from the power supply whenever installation work is being carried out.
- When the appliance is installed, protection must be provided against accidental contact in the future.
- Risk of electric shock!
- 5 Installation
- Installation
- Preparing for installation
- Caution!
- 2. Mark where the centre of the extractor hood should be on the ceiling above the centre of the hob.
- 3. Using the template provided, mark the locations where the bolts should be inserted on the ceiling.
- 4. Drill four 8 mm diameter holes to a depth of 80 mm for fastening the appliance and press in the wall plugs flush with the wall.
- Preparing the appliance
- 1. Screw in the four bolts on the edge of the frame at the marked locations, leaving them protruding out of the frame by approx. 5 mm.
- 2. Remove the film from the frame cover.
- 3. Remove the activated charcoal filter from the film.
- 4. Open the cover on the top of the appliance and remove it ¨, insert the activated charcoal filter © and then close the cover.
- Fitting the frame
- 1. Screw in the two bolts, leaving them protruding out of the ceiling by 5 - 9 mm ¨.
- Note:
- 2. Insert the two bolts on the ceiling through the openings provided in the frame ¨. Move the frame to allow the bolts to be screwed into the keyhole openings ©.
- 3. Use two more bolts to screw the frame in place. ª Tighten all the bolts fully.
- 4. Insert the four cables into the openings provided in the frame and thread them through the labyrinth.
- Establishing a connection to the mains
- : Warning
- Risk of electric shock!
- 2. Carefully thread the cables and the mains power cable through the opening in the frame cover. Place the frame cover down onto the appliance.
- 3. Mount the appliance on the wall and level it; see the section entitled "Wall-mounting the appliance and levelling it".
- 4. Thread the mains power cable through the opening in the frame and then through the strain relief.
- 5. Connect the appliance to the power supply.
- 6. Use an open-ended spanner (WAF 17) to tighten the strain relief until the mains power cable is held firmly and cannot move.
- Fitting the frame cover
- Attaching and aligning the appliance
- 1. Manually open the cable tensioners until the cable can be inserted in it. Do not use any tools.
- Note:
- 2. Enlist the help of a second person to lift the appliance and thread the cables into the cable tensioners on the top of the appliance.
- 3. Taking care to comply with the safety clearances, slide the appliance up and level it.
- 4. If you need to position the appliance lower down, lift it up ¨, push the cable tensioners down © and pull the cables back out of the cable tensioners ª.
- 5. After aligning, tighten the cable tensioners so that they are hand-tight. Do not use any tools.