Loading ...
Loading ...
Loading ...
Black plate (101,1)
北米Model "A2450BE-A" EDITED: 2008/ 3/ 24
this function can be changed by a
SUBARU dealer. Contact the nearest
SUBARU dealer if you would like to
change the setting.
NOTE
. The factory setting (default setting)
for this function is set as “operational”.
. When lea ving the vehicle, please
make sure that all doors and the rear
gate (Station wagon) are completely
closed.
. The battery drainage prevention
function does not operate while the
key is in the ignition switch.
Power door locking switches
Driver’s switch
Front passenger’s switch
All doo rs an d the rear gate (Station
wagon) can be locked and unlocked by
the power door locking switches located at
the driver’s side and the front passenger’s
side doors.
To lock all doors (including the rear gate of
a Station wagon), push the switch to the
front (“LOCK”) position.
To unlock all doors (including the rear gate
of a Station wagon), pull the switch to the
rear position.
When you close the doors after you set
the door locks, the doors remain locked.
NOTE
Make sure that you do not leave the key
inside the vehicle before locking the
doors from the outside using the power
door locking switches.
& Key lock-in prevention func-
tion
This function prevents the doors from
being locked with the key still in the
ignition switch.
! Behavior with key lock-in preven-
tion function operational
With the driver’s door open, the doors are
automatically kept unlocked even if the
door locking switch is pushed to the front
Keys and doors 2-7
– CONTINUED –
2
Loading ...
Loading ...
Loading ...