Loading ...
Loading ...
Loading ...
5
BIAMP A WOOFER AND TWEETER
• (SEE GRAPHIC B4)
• Connect the source deck front channel wires into inputs 3+4.
• Set ROUTE switch to 3+4.
• Set the switch to STEREO.
• Connect your tweeters to channels 1+2.
Set 1+2 switch to HP.
Adjust 1+2 HP frequency to the tweeter manufactures recommendation. 3500 Hz is a good starting point.
• Connect your woofers to channels 3+4.
Set 3+4 switch to LP/BP.
• If you are NOT using a subwoofer set the 3+4 switch to LP. Adjust the 3+4 LP frequency to the manufactures
recommendation. 3500 Hz is a good starting point.
If you hear distortion in your woofers set channel 3+4 switch to BP and adjust the 3+4 HP frequency to 50 Hz.
• If you ARE using a subwoofer on a separate amplifier then set channel 3+4 switch to BP and adjust the 3+4 HP
frequency to 50 Hz.
RADIO
LP LP/BP50Hz 3.5K
3+43.5K HP
MONO
B4
REMOTE SUB CONTROL
WOOFER
WOOFER
TWEETER
TWEETER
B4 <GRAPHIC of Source Radio to input channel 3+4 of amplifier. Tweeter on channels 1+2. Woofer on channels 3+4>
Loading ...
Loading ...
Loading ...