Loading ...
Loading ...
Loading ...
4
3 CHANNEL WITH BRIDGED SUBWOOFER
• (SEE GRAPHIC B3)
• If you have four input wires from the source deck plug them into inputs 1+2 and 3+4.
Set ROUTE switch to 1+2.
• If you have two input wires from the source deck plug them into inputs 3+4.
Set ROUTE switch to 3+4.
• Put your woofer/tweeters on channel 1+2.
Set 1+2 switch to HP.
Adjust 1+2 HP frequency to 50 Hz.
• Your subwoofer is wired to channel 3+ and channel 4-.
Set 3+4 switch to LP/BP.
Set 3+4 switch to LP.
Adjust 3+4 LP frequency to 50 Hz.
Set the switch to MONO.
Plug in the remote sub control.
RADIO
LP LP/BP50Hz
3+450Hz HP
MONO
B3
+–
SUBWOOFER
REMOTE SUB CONTROL
XOVER
XOVER
B3 <GRAPHIC of Source Radio to input channel 3+4 of amplifier. Woofer/Tweeter/Xover on channels 1+2, one subwoofer
wired to channel 3+ and channel 4->
Loading ...
Loading ...
Loading ...