Loading ...
Loading ...
Loading ...
7ww w.sharkclean.com
1 Press the On/Off button to start
the floor and carpet sweeper.
The lights on the base will
illuminate. When finished
cleaning, press the On/Off
button again to turn the unit off.
(fig. 3)
Fig. 3
Fig. 4
FLOOR
CARPET
Fig. 5
Fig. 6
If the brush roll stops
moving, it’s probably due
to the anti-jam feature.
This feature protects the
motor from becoming
overheated. If the brush
becomes overloaded, it
will stop turning and both
speed indicator lights will
stay on. Turn off your unit by
pressing the On/Off button
once. Then remove the brush
roll cover from the floor and
carpet sweeper base and
remove any hair or fiber
that may be on the brush
roll. Wait for 10 seconds
to let your unit cool down.
Now press the On/Off button
again and you’re ready to
resume cleaning!
See page 9 for further
instructions on removing or
cleaning the brush roll.
USING YOUR CORDLESS FLOOR AND CARPET SWEEPER
2 You can adjust the speed of
the brush roll to suit the floors
that you are cleaning. Press the
button on the right (opposite
the On/Off button) to switch
between speeds. One light
indicates the speed optimized to
clean bare floors and two lights
indicate the speed optimized to
clean carpets and larger debris
on bare floors. (fig. 4)
3 To clean under furniture, use
the Shark
®
Backsaver
™
folding
handle. Press the handle
release button and apply a bit
of pressure to bend the handle
forward. (fig. 5) The Shark
®
Backsaver
™
joint will release
from the locked position to
reach messes under furniture.
(fig. 6)
Loading ...
Loading ...
Loading ...