Loading ...
Loading ...
Loading ...
2.
Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
3.
Adjust the drive chain. 2 P. 130
4.
Install and tighten the rear axle nut.
Torque: 74 lbf·ft (100 N·m, 10.2 kgf·m)
5.
Install the chain cover and tighten bolts.
6.
Remove the protective tape or cloth.
7.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tire Puncture u Removing Wheels
Troubleshooting
165
Lug
Swingarm
Brake caliper bracket
Slot
Loading ...
Loading ...
Loading ...