Loading ...
Loading ...
Loading ...
12 49-90584
Optional Instructions
REINSTALL HINGE COVER
A. Insert the hinge cover. Align the hinge cover
holes with the holes in the door.
4
B. Secure the hinge cover with 2 tapping screws.
REVERSING THE DOOR SWING (if desired)
B. Switch the strike bracket and its cover to
the opposite side by removing the screws.
Reinstall both on the opposite side.
MOVE STRIKE BRACKET
5
A. Using a putty knife or any other flat tool, remove
the 5 beauty buttons located on the dryer where
the door will be installed and install them on the
opposite side.
Tapping
Screws
REINSTALL DOOR ASSEMBLY
7
REASSEMBLE DOOR ASSEMBLY
6
B. Turn the door over and fasten the outer door
to the inner door using the 6 tapping screws
and the 4 machine screws.
• The door is now ready to be installed on
the dryer. To ease this step, the hinge has
keyholes that allow a partially fastened screw
to be used as a hook.
Partially fasten a screw to the uppermost screw
hole. Hook the door on the partially fastened
screw.
Fasten the hinge by installing the other 4
screws and tightening the partially fastened
screw above.
Inner Door
Outer Door
IMPORTANT: Make sure there is no dirt or any
other foreign material in between the window panes.
A. Place the plastic outer door onto the inner door.
Make sure that the handle part of the outer door
is opposite the hinge as shown.
Hinge
Cover
2 - # 10
Tapping
Screws
Beauty
Buttons
Partially
Inserted
Screw
Tighten
All
Screws
6 - # 10
Tapping
Screws
4 - # 8
Machine
Screws
Loading ...
Loading ...
Loading ...