Loading ...
Loading ...
Loading ...
49-90584 11
Optional Instructions
REMOVE DOOR ASSEMBLY
A. Open the door to approximately 130 degrees.
1
REMOVE HINGE AND COVER
IMPORTANT: Note the location of the hinge (left
or right) before removing.
• With the screws removed, turn the door over
and separate the outer door assembly and hinge
cover of the door from the door frame and set
aside.
B. Remove 4 screws starting from the bottom to
the top. Make sure the door is supported while
removing the screws.
C. Loosen the top screw as shown. Unhook the
door by lifting and pulling. Remove screw.
REINSTALL HINGE ASSEMBLY
A. Install the hinge assembly in the opposite
side of the door as shown. Push the hinge
assembly in place until the hinge holes align
with the door holes.
D. Place the door on a soft protected flat surface
so the inner door faces upward (door resting
on handle side). Remove the 6 tapping screws
located around the perimeter of the door outlining
the gasket and the 2 hinge cover tapping screws.
Remove the 2 hinge machine screws and the 4
innermost door machine screws.
2
3
REVERSING THE DOOR SWING (if desired)
Outer Door Assembly
Hinge Assembly
Hinge Cover
Machine
screws
B. Hold the hinge and door on their side with one
hand and fasten the 2 machine screws as shown.
Top Screw
Remove
2 - # 10
Tapping
Screws
6 - # 10
Tapping
Screws
2 - # 8
Machine
Screws
4 - # 8
Machine
Screws
Loading ...
Loading ...
Loading ...