Loading ...
Loading ...
Loading ...
NSTALLATION INSTRUCTIONS
I
8
Step 7 :
FINAL CHECK AND ASSEMBLING
1
2
Securely hand tighten supply hose to the water
supply.
Plug the power supply cord into an earthed
electrical point and switch on.
After installing and prior to using the
dishwasher with crockery, we recommend that
you use the dishwasher on ‘Quick’ mode to
rinse through. At this stage it is useful to
ensure that there are no operating problems or
water leaks.
When the dishwasher is used for the first, there
may be a loud noise, if this happens, turn off
the power and restart the dishwasher.
Step 8 :
HOW TO LEVEL THE DISHWASHER
After installing the dishwasher, you may notice a
slight sticking of the door to the dishwasher,
when you open or close the door. If this does
happen you need to adjust the level of the
dishwasher.
• If the door slants to the right, see fig, C and
follow these instructions:
1) Unscrew(counter-clockwise) the left leg of
the back side and correct the level.
2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• When the product is correctly leveled, There
should be no slant , stickiness or friction sound.
• If the door slants to the left, see fig. D and
follow these instructions:
1) Check the opening of door if there still
remains sticky or friction sound.
2) Check the opening of door and repeat if
necessary until the door opens and closes
properly.
• When the product is correctly leveled, There
should be no slant , stickiness or friction sound.
Fig. C
Fig. D
Case 1. In case the door is slanted to the right
Case 2. In case the door is slanted to the left
Step 6 :
CONNECTION OF WATER INLET HOSE
1
2
3
Connect the water supply hose to the water tap.
(Some models consist of an inlet valve and hose.)
After connecting the inlet hose to the tap, turn
on the tap to flush out foreign substances (dirt,
sand or sawdust) in the water lines. Let water
drain into a bucket, and check the water
temperature. (Fig. A)
Connect the Supply hose to the water inlet.
(Fig. B)
Water supply
hose
Water tap
Fig. A Fig. B
• This dishwasher may be fed with either hot or
cold water. If the water can not be maintained
below 65ºC, the dishwasher must be
connected to cold water.
• When connecting, you may use sealant tape
or sealing compound to avoid water leaks.
• Make sure that the line is not kinked or
sharply bent.
• It is recommended that the new inlet hose be
used and not the existing or old hose.
Loading ...
Loading ...
Loading ...