Loading ...
Loading ...
Loading ...
UNCTION OF CONTROL BUTTON
F
12
Program
• To select a program, press this button.
UV (Selected models only)
• If you want to sterilize the dishes, press UV button before starting.
• UV can be used in both the option programs(Course+UV) and single program(UV).
• If the single program is selected, the UV lamp will turn on immediately.
• Following the drying cycle(option program), the UV lamp will turn on to perform the sterilization function.
• During the UV course, “St” will be shown on the display window.
• When you open the dishwasher door, the UV lamp will turn off.
Do not look at the UV lamp should it remain on in the event of a malfunction.
Cool Dry (Selected models only)
• When you want better drying performance, press Cool Dry button.
• Cool Dry can be used in both the option program(Course+Cool Dry) and single program(Cool Dry).
• If the single program is selected, the fan will operate immediately.
• Following the drying cycle(option program), the fan will operate for a few more minutes to diminish any remaining moisture.
• During the Cool Dry course, “Cd” will be shown on the display window.
• You can open the door and unload the dishes at any time.
Indicator
• Child Lock.
• Refill with rinse aid.
Time Left
• Before starting, the display window shows the running time of the selected program.
• After starting, the display window shows the remaining time. These times may vary due to extraneous conditions.
• If the dishwasher has trouble, the trouble type is displayed.
“OE”, “FE”, “IE”, “EI”, “HE”, “CE”, “LE”, “tE”
• If these error letters are displayed, please refer to the trouble shooting guide page 26 and follow the guide.
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the Half Load and Spray button simultaneously for a few seconds.
Then, an “On” will appear in the display.
• The beep on/off function is automatically canceled when a mains power failure occurs.
Rinse
• Repeated pressing of the Rinse button will select Extra Hot, Rinse+, Extra Hot & Rinse+.
• If you select the Extra Hot function, the operationg temperature will be up to 80
. (selectable on Dual Wash, Auto & Eco 50 only)
• When you select Rinse
+
an additional rinse cycle is added.
Half Load
• In case of small load, use upper or lower rack only to save energy.
• With each press, Upper or Lower racks can be selected.
• In case you don’t select this button, the machine always works on vario washing, which operates upper and lower spray arm alternately.
Child Lock
• Used to lock or unlock the control buttons to prevent any of the settings from being changed after the cycle has commenced.
• To activate or release the Child Lock function, press the Half Load and Rinse buttons simultaneously for a few seconds while the
dishwasher is in operation.
• All controls will be disabled except the Child Lock and Power buttons.
• Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you can operate the
dishwasher.
Power
• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular mains power disturbance to the machine, the power may be automatically turned off for safety.
Spray
• With each press, the water jet intensity is changed to Strong, Medium or Soft.
Delay Start
• If you want to delay the start of selected program, press this button.
• Pressing this button will increase the delayed starting time by 1 hourly increments.
• The delay start time can be adjusted from 1 hour to 19 hours.
Loading ...
Loading ...
Loading ...