Loading ...
Loading ...
Loading ...
11
match up channel designation with Loudspeaker
location.
WARNING: Loudspeaker terminals are hazard-
ous live and present a risk of electric
shock. For additional instruction on
making Loudspeaker Connections
contact your McIntosh Dealer or
McIntosh Technical Support.
9. Connect the MI254 power cord to an active AC
outlet.
Spade Lug or Wire Connections:
10. Connect the Loudspeaker hookup cables to the
MI254 Output Terminal being careful to observe
the correct polarities, making sure to match up
channel designation with Loudspeaker location.
Insert the spade lug connector or prepared section
of the cable end into the terminal side access hole.
Then tighten the terminal cap until the cable is
firmly clamped into the terminals so the lugs or
wire cannot slip out. Refer to figures 6, 7 and 8.
WARNING: Loudspeaker terminals are hazard-
ous live and present a risk of electric
shock. For additional instruction on
making Loudspeaker Connections
contact your McIntosh Dealer or Mc-
Intosh Technical Support.
11. Connect the MI254 power cord to an active AC
outlet.
How to Connect Different Sources for Zones B and C System
Figure 6 Figure 7
Figure 8
Loading ...
Loading ...
Loading ...