Loading ...
Loading ...
y
1. Before installing grill components, be certain
surface controls are in the OFF position.
2. Placethetwogrill-rocksintoanemptygrillbasin //UtlLqRm IllUllll;
with theirhandles running parallel to thefront of ,,,/,.--.--..--l'nmw UlUllll
the cooktop. These grill-rocks must be used / _/ilUllll'
since they support the grill element.
3. Position the grill element with the terminal plug ___11 / _ Illl_||_1iiiiIiii 1
towards the terminal receptacle. Slide the
elementtowardsthereceptacleuntiltheterminal Fig.A
plug iscompletely engaged. (See Fig. A.)
4. The grill element should rest flat on the handles
of thegrill-rocks. Do notplace black grill grates
over grill element. ._f_
5. Unfold front and rear supports until each is
standing vertically. Next, lift the sidepanel and
engage the tabs at each end of side panel into
the slotsinthe frontand rearsupports. (See Fig.
B).
6. Set the accessory base intothe grill basin with Fig.B
the open side next to the air grille.
7. Attachmotor torear support byinsertingthe two
motor mounting studs into the two keyhole-
shaped slots in the support. (See Fig. C.) The /
motor shouldbe positioned horizontally with the
powercord pointedupward.CAUTION: Position ,d
motor cord around the outside of the Rotiss-
!
Kebab to prevent motor cordfrom touching the
grill element. To turnon motor,plug cordintoan
outlet. /
8. Theaccessorycannowbeassembledforuseas Fig.C
a rotisserie or for preparing kebabs.
Loading ...
Loading ...
Loading ...