Loading ...
Loading ...
Loading ...
03/16/17 - DR www.elitescreens.com
4
Step 10. Position the Center Support Bar (l) in the middle of the frame and align the hole on each end of the support bar with the top and bottom
frame screw holes. Then fasten with the M4x12Screws (e).
Step 11. After the Center Support Bar (l) is secure, connect the center of the vertical portions of the material (2). Be sure to hook the Springs (b)
onto the Tension Rod (k) to avoid damage to the screen material. Next, connect the center of the horizontal sections of the material (3). Return
to the vertical sides, securing the remainder of the springs (4). Lastly, secure the remaining springs of the horizontal sides of the screen (5).
Installation
Step 11. Measure the overall length and height of the frame and drill holes for the Brackets (g). Line up the wall brackets with the drilled holes on the
installation location and screw them in using a Phillips screwdriver. If not installing into a structural wood stud, use a hollow wall Anchor (j), then screw in the
M5x50 Screws (j) with a screwdriver. Make sure the brackets are leveled.
1
1
1
1
2
2
3
3
5
5
4
4
Align the M6 screws
with the two holes.
Loading ...