Loading ...
Loading ...
Loading ...
Problem Solution
The appliance
functions
properly, but
the lamp does
not work
anymore.
Perhaps the lamp has reached the end of its life. The
lamp has an expected life of more than 10,000 hours
(more than 7 years of normal use). The life
depends on the use of the appliance. In case of
heavy use, the lamp may not last as long as you
expect. The lamp is not replaceable. If the lamp
breaks down, contact the Philips Consumer Care
Centre in your country.
The appliance
becomes hot
during use.
This is normal, as the appliance is heated up by the
light of the lamp and the electronics.
The appliance
does not
respond when I
try to press or
move the dials.
Remove the plug from the wall socket and reinsert
it. If you reinsert the plug within approximately 15
minutes, the appliance remembers all settings. If you
reinsert the plug after a longer period of time, the
appliance remembers all settings except the time.
The lamp does
not go on when
the alarm goes
off.
Perhaps you set a light intensity level that is too low.
Increase the light intensity level.
Perhaps you switched off the alarm function by
setting the control lever to the top position. To
switch on the alarm function, set the control lever to
the middle position
Perhaps the appliance is defective. Contact the
Philips Consumer Care Centre in your country.
The lamp does
not go on right
away when I
switch it on.
It takes approx. 1 second for the lamp to go on. This
is normal, the lamp needs to heat up.
17
Loading ...
Loading ...
Loading ...