Loading ...
Loading ...
Loading ...
4. Repeat above step for opposite guide rod.
5. Lean guide rods slightly outward, away from machine. DO NOT put excessive pressure on guide rods, it will
damage lower guide rod caps.
6. Slide top weight up and out of the machine and set aside.
7. Remove weight plates and set aside for re-installation later.
Remove Guard Plate
Remove three Phillips head screws securing guard plate to frame using a Phillips screwdriver.
QtyDescription
3Phillips head screw1
1Frame2
1Guard plate3
Remove Cam Assembly
1. Turn cam assembly to gain access to the weight cable and clamp.
2. Twist the clamp to open and pull cable end from cam notch.
QtyDescription
1Cable1
1Clamp2
1Cam notch3
3. Repeat above procedure for seat cable.
4. Remove two BHSCS from cam assembly using two 5/16” Allen wrenches.
QtyDescription
1BHSCS1
1Cam assembly2
5. Remove cam assembly from frame assembly.
Page 12 of 25
Loading ...
Loading ...
Loading ...