Loading ...
Loading ...
Loading ...
12 Philips · PPX 4150
Cleaning
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
Device Overheated
A overheat symbol appears if the device is overheated
(see also Symbols in the Statusbar, page 6). The device
behaves as follows:
1 The fan turns to maximum level.
2 At maximum level of brightness the symbol appears
in the status bar and the device turns automatically
to minimum level of brightness.
3 At minimal level of brightness the symbol shows for
three seconds in the middle of the screen. Then the
device turns off automatically.
After the device has cooled down, you can continue
playback.
Update Firmware with USB
stick
1 Format the memory card in the file system FAT16 or
FAT32.
2 Copy the file data of last firmware to root directory
of USB stick (Firmware name is MSTFLASH).
3 Make sure your device is turned off.
4 Insert the USB stick to the device.
5 Press and simultaneously switch the device
ON.
6 After that device is ON, release the .
7 After around 3 minutes, the firmware update is now
completed and the device restart.
8 Check firmware version in the information page of
the device. Press à -> Maintenance -> enter in
Information menu.
DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily flammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning flu
-
ids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
DANGER!
Do not use any Liquid Cleaning Agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coat
-
ing film on the lens.
Notice
Connect for the duration of the firmware
update the power adapter
(see also Connect
Power Supply / Charge Battery, page 7).
DANGER!
All Data will be Deleted!
This procedure erases all your data that is
stored on the memory card.
DANGER!
Inserting an USB stick!
Never pull out the USB stick while the
device is accessing it. This could cause data
to be damaged or lost.
Power!
Do nut unplug the power adapter during
the firmware update.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
PPX4150_UM_EN_253617510.book Page 12 Vendredi, 6. février 2015 2:49 14
Loading ...
Loading ...
Loading ...