Loading ...
Loading ...
Loading ...
6
2. After setting the timer, the icon and numbers on the LCD panel will blink for five (5) seconds and then
return to displaying the current humidity level in the room.
3. Press the button once at any time to check the time remaining.
Setting the Humidity
1. Press the button to adjust the humidity level by increments of 5%, or set it to CO (Continuous Mode).
The display will cycle through the available humidity levels, ending with continuous mode.
Dimming the LCD Backlight
1. Press the button to cycle through the dimming options for the LCD backlight, from H (no dimming), to
L5 (slightly dim) through L1 (dimmest), ending with L0 (no backlight).
2. The icon will only light up when the backlight is set between L5 and L0.
Humidity Levels
≥ 60%
50-55%
40-45%
Continuous Mode
Recommendations for Use
Maintaining the room at a comfortable indoor humidity level
Deterring mold and bacteria growth. Ideal for normal daily household use to maintain
humidity at a healthy level. Bacteria and mold are less likely to breed at this RH level.
Preventing condensation (extra-dry mode). Ideal for controlling a very damp room.
Start at this level for the first couple days, and then increase to 50-60% or higher
to conserve energy.
Drying clothes faster (especially in the winter). The unit will continue to remove
humidity from the air regardless of the current humidity level, unless the water tank
is full. We recommend setting a timer in this mode to conserve energy.
NOTES ON HUMIDITY:
• Humidity levels are only available from 40% – 70%. This is a standard feature on the majority of
dehumidifiers. Under 40% humidity is too dry to be comfortable, and over 70% humidity can be
too muggy to be comfortable, and could also cause the device to malfunction or create the risk of
electrical shock.
• The RH level indicated on the LCD panel has a ±10% RH tolerance, and can vary depending on the
ambient room temperature.
• Once the set humidity level has been reached, the unit will pause the dehumidification process to
save energy. See the section on page 7 for information about the auto-pause and restart function.
2. If continuous mode is not selected, the dehumidifier will run and dehumidification will occur once the room
humidity level is detected rising above the selected RH (relative humidity) level.
3. After setting the RH level, the icon and numbers on the LCD panel will blink for five (5) seconds and then
return to displaying the current humidity level in the room.
Loading ...
Loading ...
Loading ...