Loading ...
Loading ...
Loading ...
Version 01/12 - Page 5
upper
chimney
cover
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
8 3/8” min
15 3/8” max
23
5/8”
3 3/16”
36”
FIGURE 4
DUCTED
DIMENSIONS
x
min & max ceiling height examples
x = 30"
min
max
x = 28"
min
max
x = 26"
min
max
x = 24"
min
max
DUCTED INSTALLATION DIMENSIONS
(vented to the outside)
PLAN THE INSTALLATION
This rangehood can be installed as either ducted or ductless. When installed ductless, the rangehood vents out of grates on
either side of the lower chimney Ductless installations require a Ductless Conversion Kit, available from your dealer.
WARNING!
USED AND CAREFULLY CALCULATE ALL MEASUREMENTS.
WARNING
AND WEIGHT OF THIS
RANGEHOOD, THE
FIRMLY ATTACHED TO
THE CEILING. For plaster
or sheet rock ceilings, the
support must be attached
to the joists. If this is
not possible, a support
structure must be built
behind the plaster or sheet
rock. The manufacturer
assumes no responsibility
for injury or damage caused
by improper installations.
!
11 7/16"
FIGURE 5
The Diamante Isola chimney is highly
adjustable and designed to meet varying
ceiling heights as indicated in FIGURE 4.
The chimney can be adjusted for ceilings
on the distance between the bottom of
the hood and the cooktop (distance x in
FIGURE 4).
For higher ceiling installations, the High
Ceiling Chimney Kit includes an additional
ceiling heights in FIGURE 4.
NOTE: The chimney structure can
reduce down to a 27" minimum
height. To reduce the height, the
middle section of the support
structure (FIGURE 5) needs to
be removed. Out of the box, the
minimum chimney length is 32".
Subtract 5" from all minimum ceiling
height calculations in FIGURE 4
if removing the middle section.
26”
40 1/16"
Loading ...
Loading ...
Loading ...