Loading ...
Loading ...
Loading ...
Version 01/12 - Page 9
For ductless installations, install the CHARCOAL FILTER (F in
FIGURE 12)
and locking into place. See FIGURE 16
WARNING
Two people must hold the canopy in place while the third person installs the screws that attach the canopy to the chimney.
The manufacturer assumes no responsibility for injury or damage caused by improper installations.
4. From below, attach the CANOPY SECTION (A in FIGURE
14) to the assembled chimney support using the four bolts
provided (F in FIGURE 14).
FIGURE 14
FIGURE 16
6.
turning the knob to the left so that the locking lever does not
(as in FIGURE 17). Insert the opposite
FIGURE 17
7. Turn the power supply on. Turn on blower and lights. If the
rangehood does not operate, check that the circuit breaker
is not tripped or the house fuse blown. If the unit still does
not operate, disconnect the power supply and check that the
wiring connections have been made properly.
5.
A in FIGURE 15
(A in FIGURE 15)
(B in FIGURE 15) by connecting the two black plastic pieces
using the four screws provided. Using the two longer screws
METAL FLANGE (C in FIGURE 15).
FIGURE 15
MAKE THE INTERNAL ELECTRICAL CONNECTIONS
A
!
A
B
C
Loading ...
Loading ...
Loading ...